will
Posts: 88
|
| Posted: 08/09/2012, 9:45 PM |
|
Ok i have downloaded the latest ccs5 and thelatest mysql odbc connector also i have the latest wampserver installed now to the problem,
when i add the db info to the codecharge db properties codecharge stops responding direct connect to mysql codecharge locks up and crashes anything with connection crashes however if i open obdc and click test it works fine aslong as i dont put any connection info in the ccs conection area
now if i connect to local wampserver everything is fine now on that note
if i use ccs 4.3 everything works fine
|
 |
 |
MichaelMcDonald
Posts: 640
|
| Posted: 08/10/2012, 12:28 AM |
|
Can you try with Wamp 1.7.0 and report what happens?
_________________
Central Coast, NSW, Australia.
|
|
|
|
will
Posts: 88
|
| Posted: 08/10/2012, 6:35 PM |
|
ok like i stated above codecharge works with wamp no issues but trying to connect to my remote server mysql directly or obdc ccs5 crashes and frezzzzzzzzzzzzz
|
|
|
|
MichaelMcDonald
Posts: 640
|
| Posted: 08/10/2012, 7:34 PM |
|
32 or 64 bit odbc?
32 or 64 bit windows ?
_________________
Central Coast, NSW, Australia.
|
|
|
|
will
Posts: 88
|
| Posted: 08/10/2012, 8:29 PM |
|
windows 7 64
obdc works fine if i put in the info its just when i add the database info in codecharge 5
like if i go to connection select obdc and test it works now when i go out still in connections
if i click on connections and it brings up modifiy connect simple add the db info crash and lockups if i go to expert and connect directly to mysql lock up or crash
if i select obdc and when i pull up obdcand test connection is successful nowif i add that info then to the to the design connectionpart and the server connection part it locks up andstops responding
|
|
|
|
will
Posts: 88
|
| Posted: 08/10/2012, 8:31 PM |
|
but 4.3 works without problems
|
|
|
|
will
Posts: 88
|
| Posted: 08/12/2012, 7:17 PM |
|
Ok i just installed code charge studio 4.3 and everything works fine everything works but codecharge studio 5 i have not been able to connect toany database except local one if i try it stops responding so something in ccs5 is bugged
|
|
|
|
will
Posts: 88
|
| Posted: 08/12/2012, 7:18 PM |
|
i cant upgrade to 5 because i cannot use it i guess ill have to wait until ccs6 to see if its fixed I have posted support and on the forums same problem since beta of 5
|
|
|
|
yourguide
Posts: 44
|
| Posted: 08/12/2012, 10:20 PM |
|
will,
I am sorry you are having these problems with CCS 5.
Please don't conclude the lack of responses to your thread as others unwillingness to help.
I, like many others, am not totally sure why you are experiencing this issue with CCS 5.
I have CCS 5 working well on a Windows 7 64-bit machine.... I have not installed any MySQL ODBC driver(s)... I am just using the built in direct to MySQL
Perhaps you have an ODBC driver issue? You may already know this, but Windows 7 64-bit has both 64-bit and 32-bit ODBC drivers available to it.
In order to see the 32-bit drivers you have to run "odbcad32" instead of just the ODBC in the control panel.
I am confident if you could install CCS 5 on a plain Win 7 64-bit machine it will work.... it HAS to an issue with some other conflicting driver or software on your current installation.
I hope you get it working soon.... the more CCS 5 developers out there, the better it will be for everyone.
_________________
Independent, self-employed, web developer. |
|
|
|
will
Posts: 88
|
| Posted: 08/12/2012, 10:32 PM |
|
even with out using obdc connector i cant even get it to connect directly using mysql no connection works other than local take obdc out of the problem code charge 5 wont connect to anything
|
|
|
|
kirchaj
Posts: 215
|
| Posted: 08/13/2012, 5:58 AM |
|
Will,
This sounds very similar to the same issues I had trying to do the same thing. I have an open case still with support for over a month with no response. 
TK
|
|
|
|
MichaelMcDonald
Posts: 640
|
| Posted: 08/13/2012, 5:46 PM |
|
The way I am reading your post the problem sounds like when you publish the CCS 5 project to your local WAMP or XXAMP server, the published web application cannot connect to a MySQL database which is running on your local computer.
Please advise either yes or no to this diagnosis?
If this is not the case, then is the problem a failed test connect to the server in the modify connection settings dialogue within the project?
Please advise either yes or no to this diagnosis?
_________________
Central Coast, NSW, Australia.
|
|
|
|
will
Posts: 88
|
| Posted: 08/13/2012, 6:11 PM |
|
What I am saying is when i start codecharge 5 and create a new project then in my new project i click on new connection the new connection opens up I add the database info and as soon as i click test or ok ccs5 stops responding
how ever if i use local server as host it works fine
|
|
|
|
will
Posts: 88
|
| Posted: 08/13/2012, 6:41 PM |
|
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: CodeChargeStudio5.exe
Application Version: 5.0.0.0
Application Timestamp: 4fbcde80
Hang Signature: 1975
Hang Type: 262400
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
|
|
|
|
DataDoIT
|
| Posted: 08/14/2012, 5:19 AM |
|
If not already, you need to be interacting with support on this and not
the forum. Send them the same error messages. I noticed that your
error dialog refers to version 5.0.0.0, which isn't the latest.
Again, run through support.
|
|
|
|
elombert
Posts: 2
|
| Posted: 08/14/2012, 7:14 AM |
|
I'm having connection issues too when deploying the application. At design time, the preview pages show correctly. When I deploy the application, the data pages does not show at all, nothing goes out after a while waiting for the server.
The connection settings I set on CCS are correct because I use other applications not CCS generated and they work perfectly.
I'm on windows 7, mysql 5.1.49-community, CCS5.0.0.16254
Any suggestions?
-------------------------------------------------------------------------------------
EDIT:
This problem has been solved! The change I made was to use the address 127.0.0.1 instead of the name localhost. The localhost name works fine at design time but not after the project has been deployed.
_________________
Ellis Lombert
LQ Softwares
www.lqsoftwares.com |
|
|
|
russcam
Posts: 1
|
| Posted: 08/18/2012, 1:23 PM |
|
I too have a problem which may be related. W7 x64 and latest version of CCS 5. After installation and while the program was running I experienced intermittent mouse freezing for about 15 mins then the system blue screened. After system restore and then system repair all is well again, but I have not yet reinstalled CCS5. Anyone having similar problems? Regards Russell
|
|
|
|
apexsciences
|
| Posted: 08/19/2012, 9:42 AM |
|
Le 2012-08-10 00:45, will a écrit :
> Ok i have downloaded the latest ccs5 and thelatest mysql odbc connector also i
> have the latest wampserver installed now to the problem,
>
> when i add the db info to the codecharge db properties codecharge stops
> responding direct connect to mysql codecharge locks up and crashes anything
> with connection crashes however if i open obdc and click test it works fine
> aslong as i dont put any connection info in the ccs conection area
>
> now if i connect to local wampserver everything is fine now on that note
>
> if i use ccs 4.3 everything works fine
> ---------------------------------------
> Sent from YesSoftware forum
> http://forums.yessoftware.com/
>
Default demo application with CCS using direct MySQL access vs MySQL via
ODBC seems to to behave differently.
As an example, I recently installed the demo task manager, and changed
the db access from odbc to direct MySQL, to realize it will not work,
some of the SQL statement calling the statement TOP, which exists in
Oracle but not in MySQL (have to use LIMIT X,Y). I started replacing the
TOP with LIMIT, but the revert use of the ODBC driver fixed everything,
i.e. the ODBC drivers seemed to take care of the difference.
Maybe your problem was related to that. Can anyone validate that the
ODBC driver does perform such conversion on our behalf (TOP to LIMIT) ?
Regards,
LP
|
|
|
|
will
Posts: 88
|
| Posted: 10/02/2012, 10:09 PM |
|
OK guys I found out the issue it was my host i switched web host and it works great no hangs no crashes since
|
|
|
|
